The Best Table Saw Blade You Need

The table saw is must having a woodworking tool in your garage or chop shop. And the circular best table saw blade is the heart of this power tool by which wood being cut in different sizes and patterns. Before we know how it works, want to take a presence about its anatomy. The more you know about it the better choice you can make. You are going to have varieties of the best table saw blade out there. Full kerf, the thin kerf, crosscut, combination is generally being found in a hardware store. There are lots of manufacturers who provide such a good quality with this product or after market. DeWalt, Bosch, Skillsaw, Hitachi are one of the most popular ones. The best table saw blade is a must have thing in your table saw.

Difference Between Full Kerf And Thin Kerf

This one is what we call a full kerf you will notice that the teeth from side to side are quite a bit wider than thin kerf. This is called full kerf and because the teeth are about an eighth of an inch or about 3.18 millimetres. Where thin kerf’s teeth are about three of an inch or about 2.4 millimetres.

The difference between a full kerf and a thin kerf is pretty simple. You can say, there is much more carbide on the full kerf. So, it’s wider than the thin kerf. It takes more material, makes more dust. But the teeth are much bigger. So, they are going to stay sharpened longer. And you are going to get more re-sharpen out of a full kerf. Thin kerf, on the other hand, is more for saws that underpowered but not as much carbide. So there’s less with less material to take away less.

dust and a little bit easier to push this blade through the wood. Because there is less blade to go through. For most people with home workshop and smaller table set up maybe contractor type, a thin kerf is often the most desired best table saw blade. Industrial companies and companies that are doing a lot of woodworking will often select a full kerf.

In most cases, the purpose of a better quality saw blade is to get a better quality cut. And some of the thin outbreak a difference, for example, ripping blade typically have fewer teeth. Usually ripping one has 24 to 30 teeth. On the other hand crosscut blade typically have from 60 to 90 teeth you can see there that many more. Now a couple of other features of this blades, in front this has ripping teeth. And you will notice that this has large gullets and that’s because the ripping one is used for ripping natural wood and ripping the length of it. So there’s a long fibrous wood material so we need a long gullet to, help reduce that material so the next tooth comes along and cut it. There is a little knob in the middle is called the anti-kickback tooth. And it does work. And it helps to reduce kickbacks.

On the contrary, in a crosscut blade, you can see that many more teeth and it has tiny bullets because this one is now cutting through the cross of, cutting across the grain of the wood. It doesn’t need to remove stringy parts. It’s now removing more sawdust. But because it’s cutting across the grain you need many more teeth to make a nice fine cut.

Combination

Another option is something called a combination one and this one happens to be a 50 toothand you will notice that it has some large bullets. But also has some smaller gullet. So this one will do both ripping and cross-cutting. The disadvantage with combination and general-purpose blades is they usually do an okay job of ripping and an okay job of cross-cutting. If you want really good quality you are best to go to a come or a dedicated ripping or dedicated crosscut blade. You will get a little bit better cut from those.

Comparison Based On Usability

The ripping one is for running long cuts. With the ripping one, you get a nice fine cut. In fact, you can’t see the cut until I you separate the cut piece. But if you are thinking of ripping, this is not a good idea. Let’s talk about how many teeth you may need. The more teeth will give you a fine cut. But fewer teeth will do the job. If you looking for cross-cutting, then you should go with a crosscut. Between 60 to 90, you are looking for fine crosscut then go with higher teeth option. And if you want just your work done then go for free teeth. And if you want both crosscut and ripping, then you should go with the combination one.

That concludes my article for today on some basic information on the best table saw blades. And the information you can use to help you make better choices.

Leave a Comment